First Alert 8 Channel Dvr With 8 Wired Cameras Manual de usuario descargar pdf (Pagina 15)

Setting Up

Model 8800 User's Manual

MOUNTING A CAMERA

1 Select the position for the camera and secure the camera stand. (Use an appropriate

screw type for the mounting surface.)

2 Screw the camera onto the stand. Tighten the lock nut.

3 Adjust camera to the proper view angle. Make sure the lens is upright relative to the

subject. Tighten the thumb bolt.

INSTALLING AND CONNECTING THE CAMERAS AND DVR

1 Connect the camera video connector into the BNC cable (supplied).

2 Connect the BNC connector on the other end of the cable to the video input on

the DVR.

3 Plug the camera power connector into the BNC cable.

4 Plug the other end of the camera power cable into one of the camera splitter

connectors.

5 Plug the camera power connector from the 12V DC power supply adapter into the

splitter.

6 Plug the DVR power connector from the 12V DC power supply adapter into the power

input on the rear panel of the DVR.

7 Plug the power supply cord from the two adapters into an electrical outlet.

thumb screw

lock nut

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 106 107

Sin comentarios

First Alert 8 Channel Dvr With 8 Wired Cameras Manual de usuario Pagina 15