First Alert Dual Digital Wireless Cameras With Lcd Display Manual de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 18
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
Page 16
Troubleshooting
Technical Information
Storage Data Management
Problem Possible Causes Remedies
System message shows
“No Signal”
No power supply to camera If camera power status indicator light is
off, check power adapter and power cable
connection.
Channel is not linked up to camera Move the camera closer to the receiver,
and connect the camera to the desired
channel. Go to “Camera Setup” in the
Menu. Use the “Pairing” sub-menu to
connect the camera to the receiver.
Service out of range Move the camera closer to the receiver.
Signal is blocked If possible, remove major obstacles in
between the camera and the receiver. Or,
relocate the camera to another location.
Low or Unstable Signal
Antenna direction is limited Adjust the camera antenna and receiver
position.
Signal has been blocked If possible, remove major obstacles in
between the camera and receiver. Or,
relocate the camera to another location.
Strong radio signal nearby Keep WIFI router away from the camera
and / or receiver.
Strong electromagnetic interference
nearby
Keep active appliances such as hair
dryers, heat fans, air conditioners, water
pumps, or microwave ovens away from the
camera and / or receiver.
Channel(s) disappear during auto or
manual scan
Scan channel(s) has been turned OFF Go to Menu; turn ON the channel(s).
Dim or overly bright image at night time Low Light vision distance is too short /
too far or a glass pane is too close.
Adjust the camera to have the view fit the
ideal distance: 15 to 24 Feet.
Recording does not work No SD Card Unlock the SD Card. Insert an SD Card
Motion detection does not work Motion Detection record setting is set to
OFF
Set Motion Detection record period to 5
sec or 10 sec. You may also set the record
option to ON to record all the time.
Audio feedback Camera and receiver are too close. The camera has a high sensitivity
microphone. Keep the camera at least 10
feet away from the receiver. If the camera
must be within 10 feet of the receiver, keep
the volume down.
Poor Image Quality Interference
Place the camera and / or receiver antenna
at a new angle or readjust its position to
make an improvement.
Remove obstacles between the camera
and receiver that might affect the signal
(e.g., furniture, cabinets, and walls.)
Relocate the camera closer to the receiver.
System Message Shows "Free Space" SD Card Full
Replace SD card or delete video files
Reformat SD
SD Card Capacity 640 x 480 (VGA) 320 x 240 (QVGA)
1G 110 Minutes 165 Minutes
2G 250 Minutes 350 Minutes
8G 1070 Minutes 1450 Minutes
16G 2170 Minutes 2960 Minutes
TROUBLESHOOTING
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18

Comentarios a estos manuales

Sin comentarios