
7
8
Consumer Aairs / Safe Identication Record Use, Care & Maintenance
CONSUMER AFFAIRS
YOUR SAFE’S UNIQUE IDENTIFICATION NUMBERS
When contacting Consumer Aairs, you should be prepared to supply some important
information that specically identies your safe. This information is extremely
important to assuring prompt and accurate customer assistance. It is strongly
recommended that you identify and record the following information in the “Safe
Identication Record” form located on the inside back cover of this manual.
MODEL NUMBER SERIAL NUMBER KEY NUMBER
LOCATING MODEL & SERIAL NUMBERS
Most First Alert
®
safes include a small metallic silver or gray tag axed to one of
the surfaces. This tag is usually located on the front or right side of the safe. This
tag contains the Serial Number, and on selected models a similar tag is attached
containing the Model Number. If a Model Number tag is not attached to the
safe, then it can be located on the front or side panel of the box that the safe was
packaged in. Write this number down for future reference.
LOCATING KEY NUMBER
The Key Number is located on the key. If you do not have the key, the number is
also imprinted on the Key lock.
SAFE IDENTIFICATION RECORD
Model Number ________________________________________________
Serial Number _________________________________________________
Key Number __________________________________________________
Digital Passcode Record
Your passcode must be at least 3 digits and no more than 8 digits followed by the # sign.
#
DO NOT REMOVE TAGS
IMPORTANT:
In case your safe becomes inoperable or you lose your keys, these identication numbers
will be needed to correct the problem. It is recommended that the number tags remain in
place on the safe. If removal is necessary, then they should be attached to the inside back
cover of the Operation and Installation Guide. Do not put manual or tags inside the safe.
Store in a safe and secure place for future reference.
APPROPRIATE USE OF YOUR SAFE
First Alert
®
re safes protect paper records and many other valuables. Veried re protection for: Memory
sticks, CD’s & DVD’s, USB Drives. This product is NOT INTENDED to protect audio or video cassettes, oppy
discs, data cartridges, lm and photos or photo negatives. Your safe must be closed and latched in order to
properly protect the contents from re.
MOISTURE WARNING
We recommend that you place delicate items such as pictures or intricate jewelry into an air-tight
container before storing them in your safe. Avoid placing your safe in areas of high humidity. For
optimum performance, the safe should be opened and aired out for at least 20 minutes every two weeks.
FIREARMS WARNING
This safe is not designed to store medication, items with combustible content, guns or other weapons.
Please contact BRK at 800-323-9005 or shop www.FirstAlert.com for information about safes that can
securely store your rearms or medication.
PEARLS
Because pearls sustain heat damage at temperatures below 350° F, we advise that you DO NOT store pearls
in this re safe.
SAFE CARE & MAINTENANCE
When properly maintained, your safe will continue to operate and accurately read the authorized
Passcode for many years. In order to ensure optimum performance of your safe, please follow these simple
precautions:
BATTERY MAINTENANCE
We recommend that you place delicate items such as pictures or intricate jewelry into an air-tight
container before storing them in your safe. Avoid placing your safe in areas of high humidity. For optimum
performance, the safe should be opened and aired out for at least 20 minutes every two weeks.
1
Always purchase and use batteries as specied by this User's manual.
2
Always replace all batteries at the same time. It is recommended to replace all batteries at least
once a year or sooner depending on amount of use.
3
Always clean the battery contacts in the battery compartment and on the batteries before
installing new batteries.
4
Always make sure batteries match polarity ( + / – ) signs in the battery compartment.
5
If safe will not be used for an exhausted period of time, removing batteries is recommended.
6
Always promptly remove and properly discard all used batteries.
CLEAN HANDS
Never attempt to operate the digital keypad if your hands have excessive dirt, debris or liquids on them.
CLEAN SAFE
To clean the surface of your safe, it is recommended that you use a mild cleaner (e.g. window cleaner) to
avoid scratching or discoloring the surface. Always wipe dry and NEVER use abrasive cleansers on the safe
or digital keypad.
For future reference, store this Operation and Installation Guide in a secure area away from the safe.
DO NOT DISCARD!
Comentarios a estos manuales